Diatex
Site : https://www.diatex.com
Diatex
56 Chemin des sources
69230 Saint genis Laval
You are here Diatex > Our divisions > Composite Division > Products > Vacuum equipment >> Control of vacuum level

Products

Control of vacuum level


A pressure monitoring system designed for use with vacuum or pressure composite injection or infusion processes.
Ceramic sensor can be mounted in any position and resin can be cured directly against sensor face. Includes 10 m cable and connector for attachment to either a readout/control unit or a Ciject injection machine.
Control unit with twin LED display. Upper display shows current pressure reading in bar. Lower display is set by the operator in bar. If the set pressure is exceeded, an electro-pneumatic valve is actuated. Valve has N/O (normally open) and N/C (normally closed) ports.

Readout units
1 SENSOR 4 SENSOR INPUTS 8 SENSOR INPUTS
   
CO-XE-0051 CO-XE-0053 CO-XE-0057
  • Included 220V AC supply
  • 4 sensor inputs
  • 1 selector switch
  • 8 sensor inputs
  • 1 selector switch


LED readout unit to display pressure reading (in bar). Upper display shows current pressure. Lower display is used in conjunction with optional control valve (XE-0052) and set by the operator. 
If the set pressure is exceeded, the control valve is actuated.

Retour haut de page