Diatex
Site : https://www.diatex.com
Diatex
56 Chemin des sources
69230 Saint genis Laval
You are here Diatex > Our divisions > Composite Division > Products > Vacuum moulding >> Perforated Release films

Products

Perforated Release films



DIATEX offers a range of perforated and non-perforated release films for high temperature applications.
Polyolefin films release with most resins.
Fluoropolymer films release with all types of resins.



The perforation of these separator films is controlled by indicators that guarantee a quality of hot perforation throughout the manufacturing process. 


Low temperatures application



Belonging to the polyolefin family, these films have a good chemical and thermal resistance for a low cost.
Perforated release films with a large range of resins.
Do not use with autoclave process

DESIG TEMP. MAX THICKNESS WIDTH LENGHT ELONGATION COL. PERFORATION TYPE
ELA20 125°C 25µ 1 ,45 m 400 m   blue* P1 C. Polyethylene
ELA20 125°C 25µ 1 m 200 m 400% blue* P3 / N C. Polyethylene
ELA50 125°C 50µ 1,45 m 200 m 300% blue NP / P1 / P0 C. Polyethylene
PP40 160°C 40µ 1,60 m 200 m 700% red P1 / P3 / N C. Polypropylene


HIGH TEMPERATURES APPLICATION



Belonging to the fluoropolymer family, these perforated films have a very good chemical and thermal resistance.
Release with all resins.
Recommend for autoclave process.

DESIG TEMP. MAX THICKNESS WIDTH LENGHT ELONGATION COL. PERFORATION TYPE
PMP200 200°C 30µ 1,50 m 200 m  T:300% L:140% red N / P1 / P3 Polymethylpentene
ETFE230 230°C 15 et 20µ 1,50 m 150 m 300% blue N / P1 / P3 ETFE Fluoropolymer
A5000 260°C 25/50µ 1,22 m 183 m 300% red NP / P1 / P3 FEP Fluoropolymer
PTFE315 260°C 25/50µ 52,4 m 1,42 m 400% red NP PTFE


 

Retour haut de page