Diatex
Site : https://www.diatex.com
Diatex
56 Chemin des sources
69230 Saint genis Laval
You are here Diatex > Our divisions > Composite Division > Products > Vacuum moulding >> Bagging films

Products

Bagging films



Bagging films are recommended for the moulding of elaborate forms. Advantages : good mechanical and chemical resistance, important elongation rate, non porous, cost effective.


DIATEX provides a wide range of bagging films for vacuum moulding and vacuum infusion.

PO180-film-mise-sous-vide
PA205 HF is a carved bagging film for the vacuum moulding of composite parts. Its 3D structure provides a perfect vacuum compacting and allows to take out the bleeder for compaction or vacuum moulding combinated to our Microporous peel ply. PA205 HF is a green bagging film as it enables using less peripheral device. The nylon bagging film PO180 reduces waste. Used for vacuum moulding, it is available in lay-flat tubing and sheet, in 50µ or 75µ. PO120 is mainly recommended for vacuum infusion of composite materials with advanced shapes.


Bagging films range

REFERENCES F TEMP       PROCESS
  TEMP VACUUM
ELONGATION
AUTO-
RELEASE
USE WITH RESIN*      
PO120 120 °C 400% YES E | P | VE | EL  
DIABAG 80 135 °C 750% - E | PH | EL  
PO150 XD2 145 °C 1000% YES E PH | EL  
PO150YJ 150 °C 400% YES E | P | VE | PH
PO160 TUBE 160 °C 350% YES E | PH  
PO175 177 °C 365% YES E | P | VE | EL  
DIABAG 80 HT2 180 °C 650% - E | PH | EL  
PO180 180 °C 360% YES E | P | VE | PH | EL
PO180 TUBE 180 °C 360% YES E | P | VE | PH | EL
PA205 205 °C Low YES E | P | VE | EL
PA205 TUBE 205 °C Low YES E | P | VE | EL
PA205 HF 205 °C Low YES E | P | VE | EL  
PA232 232 °C Low YES E | P | VE | EL
PTFE260 260 °C Low YES E | P | VE | PH | EL  
POLYIMIDE 400 °C Low YES TP  
POLYIMIDE HM 400 °C Low YES TP  

* E = Epoxy | P = Polyester | VE = Vinylester | PH = Phenolic | EL = Elastomere | TP = Thermoplastic
 Oven  Autoclave  Vacuum Infusion





 

Retour haut de page