Diatex
Site : https://www.diatex.com
Diatex
56 Chemin des sources
69230 Saint genis Laval
You are here Diatex > Our divisions > Composite Division > Products > Vacuum infusion >> INFUPLEX®

Products

INFUPLEX®




INFUPLEX® is a multilayer system used in manufacturing processes for vacuum infusion of composite materials. The systems combine two vacuum consumables into a two-layer unit (a perforated film and a net bleeder on top).


There are 4 INFUPLEX®versions with 4 different net bleeders : INFUPLEX FLONET, INFUPLEX DIANET135, INFUPLEX OM70 and INFUPLEX ISONET.


INFUPLEX®is also a very simple solution to lay up the bagging materials.


Some of these are used in successive layers, such as peel ply, perforated film, net bleeder, and vacuum-bagging film. Standard procedures involve applying each one separately (e.g., peel ply, perforated film, net bleeder), which can be difficult, especially when moulding is done against a vertical mould (spray glue is required). This type of procedure can result in overlapping on very large parts, or even the omission of a layer. Overlapping can cause deformation on thin parts, creating weak areas, or it can affect the porosity of subsequent layers.


Omissions can have dramatic consequences on the moulded part’s final properties.


The solution to these problems was created by DIATEX in 2007 in the form of INFUPLEX a multilayer system to be laid down on one side of the fibber or on top of the peel ply.

The system combines the two above mentioned vacuum consumables into a two-layer unit : the perforated film, permeable to resin and gases ; and the net bleeder on top. This easy-to-use solution has eliminated the risk of overlap or of omitted layer.


 

  NET
BLEEDER
PERFORATED
FILM
USE WITH
RESINS*
RESIN FLOW
SPEED



 INFUPLEX ISONET

ISONET
115g/m²
Blue / Blue
ELA20 P1 E | VE | Polyester ●●



INFUPLEX OM70

OM70
180g/m²
Green / Black / Blue
ELA20 P1 E | VE | Polyester ●●●



INFUPLEX
DIANET 135

DIANET 135
135g/m²
White / Blue
ELA20 P1 E | VE | Polyester ●●●●


INFUPLEX
FLONET

FLONET
112g/m²
Yellow / Blue
ELA20 P0 E | VE | Polyester ●●●●●



INFUPLEX
OM70 PA

OM70 PA
220g/m²
White / Blue
ETFE P1 Epoxy HT ●●●



INFUPLEX
DIANET PA

DIANET PA
125g/m²
White / Blue
ETFE P1 Epoxy HT ●●●●





 

Documents

  • INFUPLEX DIATEX EN
225 bytes
Loading
Retour haut de page